. OPERATION TROUBLESHOOTING 3 - 134 CHASSIS ( ) : Always contact your Komatsu distributor when dealing with these In cases of problem or causes which are not listed below, contact your Komatsu distributor for repairs. Problem Main causes Remedy Oil pressure in torque converter fails to rise Check, repair ( Check, replace) Add oil to the specified level. For details, see CHECK BEFORE STARTING Clean.
For details, see EVERY 500 HOURS SERVICE Torque converter is overheats Clean radiator core See ENGINE related parts ( Clean or repalce) Go to "Oil pressure in torque converter fails to rise" ( Replace gear pump) Torque converter oil temperature gauge does not work ( Replace oil temperature gauge) ( Check, repair) Lacks drawbar pull (machine does not pick up speed) See ENGINE related parts Go to " Oil pressure in torque converter fails to rise" Machine will not move when joystick is placed in FORWARD Insufficient oil in power train case Transmission oil pressure does not rise Defective Brake Defective lever wiring Parking brake lever is in LOCK position Add oil to specified level.
For details, see CHECK BEFORE STARTING Go to oil pressure in torque converter fails to rise ( Adjust linkage) ( Check, repair) Set to FREE position Does not steer even when steering is operated ( Check, repair) ( Check, replace) ( Check, replace) Machine doesn't stop when brake pedal are depressed ( Adjust linkage) ( Check brake pressure) Track comes off Adjust track tension. For details, see WHEN REQUIRED Sprocket develops abnormal wear Adjust track tension. For details, see WHEN REQUIRED Machine does not travel in straight line ( Adjust) ( Replace) Blade rises too slowly or does not rise at all (or blade tilts too slowly) Add oil to specified level.
For details, see EVERY 250 HOURS SERVICE Check Set to FREE position