Komatsu — GUIDE TO MAINTENANCE

. MAINTENANCE GUIDE TO MAINTENANCE CHECK SERVICE METER: Check the service meter reading every day to see if the time has come for any necessary maintenance to be performed. KOMATSU GENUINE OILS: Use Komatsu genuine oils and grease. Choose oils and grease with proper viscosities specified for ambient temperature. 4 - 2 GUIDE TO M Do not perform any i nspection and maintenance ope ration that is not fo KOMATSU GENUINE REPLACEMENT PARTS: Use Komatsu genui ne parts specified in the Parts Bo ok as replacemen ALWAYS USE CLEA N WASHER FLUID: Use automobile wind ow washer fluid, and be careful not to let any dirt g CLEAN OIL AND GR EASE: Use clean oil and gr ease.

Also, keep the containers o f the oil and greas e clean. Keep foreig n materials away from oil and grease. CHECKING FOREIGN MATERIALS IN DRAINED OIL: After oil is changed o r filters are replaced, check the ol d oil and filters for m etal particles and for eign materials . If l arge quantity of metal pa suitable action. rticles or foreign materials are found, always report to the person in charge, and carry out harge, an arry FUEL STRAINER: If your machine is eq uipped with a fuel strainer, do n ot remove it while f WELDING INSTRUCT IONS: e starting switch. e than 200 V continuously. g cable within 1 m (3.3 ft) of the area to be welded.

If grounding cable is connected near ectors, etc., the instruments may malfunction. Turn off the engin Do not apply mor Connect groundin g cable within 1 m (3.3 instruments, conn ectors, etc., the instruments may malfunction. If a seal or bearing happens to come between the p art being welded a nd grounding point, change the grounding point to avoid suc h parts. ea around the work equipment pins or the hydraulic cylinders as the grounding point. Do not use the ar ea around the work equipment pi ns or the hydraulic cylinders as the gro unding point. DO NOT DROP THIN GS INSIDE MACHINE:

When opening ins pection windows or the oil filler port of the tank to carry out inspection, be careful not to drop nuts, bolts, or tool If such things are lead to failure. If s inside the machine. dropped inside the machine, it m ay cause damage and/or malfunction of the machine, an d will you drop anything inside the mac hine, always remo ve it immediately. r inspection. Do not put unnec essary things in your pockets. C arry only things wh ich are necessary fo DUSTY WORKSITES: sty worksites, do as follows:

When working at du Inspect the dust in dicator frequently to see if the ai r cleaner is dirty o Clean the radiator core frequently to avoid cloggin Clean and replace the fuel filter frequently.