. MAINTENANCE SERVICE PROCEDURE SERVICE PROCEDURE WHEN REQUIRED CHECK, CLEAN AND REPLACE AIR CLEANER ELEMENT WARNING the engine and damage it. of dust indicator (1) NOTICE Do not clean the filter element until after a yellow piston in the dust 4 - 20 If inspe ction, cleaning, o r maintenance is carried out wi th the engine running, dirt will get into t ons. Always stop the engine before carrying out these operati When u sing compressed air, there is dang er that dirt may be blo wn around a nd cause serious inju Always use protective gl asses, dust mask, and other pro tective e quipment.
CHECKIN If the yel becomes red (7.5 kPa), clean the outer e indicator d If the filter dust indic isplay has come element is clean ator display com in the red area (7.5 ed frequently bef es in the red are kPa). ore the yellow piston in the a (7.5 kPa), the air cleaner cannot exe rt its inherent cle aning capability, r educing its cl eaning e ffect. In addition , dust sticking to the element falls into the inner element each time the el ement is cleaned . CLEANING OR REPLACING OUTER ELEM 1. Open the left engine side cover. 2. Remo ve three clips ( 2), then remove NOTICE Never remo ve inner elemen t (5). If it is remove d, dust will en ter and cause engine trou ble. 3. Remo ve outer eleme 4.
Clean the interior of the air cleaner b ody, cover (3 ) and e vacuator