. MAINTENANCE SERVICE PROCEDURE CHANGE OIL IN DAMPER CASE WARNING the rear bottom of the machine the front side of the machine 4 - 63 Th e parts and oil i s very hot just after the operatio n. Wait until the oil temperature drops , then start the work. ry to open or clo Th e undercover is heavy. Never t directl y beneath it. When removing bolts(2), carry o ut the work from the re ar of the cover s o that you can e asily get out of t When removing dr ain plug (5 ) of t he damper case, take care not to get oil ove Refill capacity: 1 .7 liter (0.45 U 1. Remove the un dercover from ody as follows 1) R emove tw ody. olding the f the mach 3) L ower and open the cove 2.
Remove oil lev el plug (3 ) an d oil filler plug (4), then remove d p rain plug 5 to drain the s drained, tighten lug (5). 3. A dd oil through r eaches the bo ttom edge of t he hole of oil le 4. A fter refilling th e oil, tighten p lugs (3) and (4