. SAFETY GENERAL PRECAUTIONS when locked, and cause serious injury or property damage. the engine. Use the key to lock all the equipment. Always remove the key, take it with you, and keep it in the specified place. 2 - 10 KEEP MACHINE CLEAN If water gets into the elect rical system, there is a hazard that it will cause malfunction s or misoperation. Do not use water or steam to wa sh the electrical system (senso rs, connectors). achine ip and ep the If inspection and mainten ance is carried out when the m is still dirty with mud or oil, there is a hazard that you will sl fall, or that dirt or mud will get into your eyes. Always ke machine clean.
is still dirty with mud or oil, there is a hazard that you will sl fall, INSIDE OPERATOR'S COMP ARTMENT or's compartment, always remove all mud and oil from the soles of your shoes. When entering the operat or's compartment, always remo ve all mud and oil from the s If you operate the pedal w ith mud or oil affixed to your shoes, your foot may slip and this may cause a serious s lying around the operator's compartment. to the window glass. Suction pads act as a lens and may cause fire. ones inside the operator's compartment when driving or operating the machine. s objects such as flammable or explosive items into the operator's compartment.
hoes, your foot may slip and this may cause a serious accident. Do not leave parts or tool s lying around the operator's co Do not stick suction pads to the window glass.
Suction p ads act as a lens and may c Do not use cellular teleph ones inside the operator's com partment when driving or op Never bring any dangerou s objects such as flammable o r explosive items into the op ALWAYS APPLY LOCK WHEN LEAVING OPERATOR'S SEAT Before standing up from the operator's seat (such as seat), lower the work equi set work equipment lock lever ( adjusting the operator's completely to the ground, parking brake lever (2) sec urely to the LOCK position, the the If there is a hazard that th completely to the ground, set work equipment lock lever ( parking brake lever (2) sec urely to the LOCK position, the