. OPERATION EXPLANATION OF COMPONENTS METHOD OF USING OIL AND FILTER MAINTENANCE MODE displayed (3) The quantity of replacements until now is displayed. by Replacement Interval 500h 500h 500h 2000h 1000h 0h 2000h 1000h 2000h 1000h 500h 0h (*) Although the marked item is displayed, it is not used with this machine. When the oil or filter has been replaced, select the applicable item, then operate the buzzer cancel switch to U . The screen will ask if you want to display the replacement history. Operate the information switch to select YES, then operate the buzzer cancel switch to U .
The replacement quantity will increase by 1, the replacement interval will be reset, and the oil, filter change interval lamp will go out. When this is done, if the maintenance caution lamp does not go out, there is another item close to the replacement time, so check that item. 3 - 26 NOTICE This function i s only a g uideline. I f dirty oil or filters are found during daily maintenance, replace t hem immediately If the controller s or monitor panel are replaced, the timer for this function will not w ork properly. Contact your K omatsu distributor for r eplacemen t.
In th e o il for oil (multi-information) (1) T (2) T he he item i time r s displaye emaining u and filter maintenan and f ilters e replacemen t intervals panel B The display items ca n be di splayed in orde information s witch to the left o r right ( ). operating the Display Item 1. ENG.OIL Engine oil 2. ENG.FLT Engine oil filter 3. FUEL.FLT Fuel filter 4. HYD.FLT Hydraulic oil filter 5. CORR.FLT Corrosion resistor 6. BYPS.FLT Bypass filter (*) 7. DAMP.OIL Damper oil 8. OIL Final drive oil 9. HYD.OIL Hydraulic oil 10. POWL.OIL Power train oil 11. POWL.FLT Power train oil filter 12. HSS.FLT HSS charge filter (*)