. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS Gear shifting When switch (c) or switch (d) is pushed, the transmission speed will change. UP switch (c): Each time the switch is pressed, the transmission will up shift one speed. the For details of the maximum speed in each speed range, see "SPECIFICATIONS (PAGE 5-2)". Operating counterrotation turn WARNING 3 - 39 DOWN switch (d): ressed transmission will down shift one s peed. REMARK being used is displayed on panel A on the monitor panel according to the gearshift operation. ayed on the display panel. 2 is displayed on the display panel. 3 is displayed on the display panel.
brake lever is locked, P is displayed.\T he method of shifting gears according to the shift mode, see the "SHIFTING GEARS (PAGE ode selection means that the selected speed range is displayed at the NEUTRAL position (N) The speed range being used is displayed on panel A on th e monitor panel accordin g to the gears hift operati Neutral: N is displ ayed on the display pan FORWARD 2nd: F 2 is displayed on the di splay pan REVERSE 3rd: R 3 is displayed on the dis play panel When the parking brake lever is locked, P For details of t 3-94)". Shift m before starting.
shift mode, peed rang When operating the counterrotation turn, if the load on the left and right is not balanced, the m achine may ma ke a pivot tu rn, so check the ground co nditions and be careful no t to hit any obstacle s when carrying out the op eration. With the lever at the N position, move t he lever p artially in the direction of turn. The left and right track s will rotat e in op posite directions, and the machine will make a sl ow counterrotatio n turn. If the lever is opera ted further, the speed of the counterrotati on turn will increase. rotation turn tation turn (R): Right counter (L): Left counterro