. OPERATION EXPLANATION OF COMPONENTS OPERATION EXPLANATION OF COMPONENTS (D65PX) 3 - 43 Pitch First set the lever to the neutral positio n, then keep switch (A) in the center of th e knob pushed down and carry out the til operation to chan ge the cutting angle o f the blade. (b) HOLD: Blade is stopped and held i n this position. (e) REAR PITCH : Min. digging a ngle (f) FORWARD PI TCH: Max . digging a Precautions w hen using pitch contro l When using the p itch operation, the tilt operation changes as follows. Pitch condition Tilt operation Amount of tilt Max. forward pitch Only left tilt operation is possible Max.
890 mm (35.1 in) Forward pitch Standard pitch Rear pitch Both left and right tilt operations are possible Compared with standard: LEFT tilt is LARGER RIGHT tilt is SMALLER 460 mm (18.1 in) (both left and right) Compared with standard: LEFT tilt is SMALLER RIGHT tilt is LARGER Max. rear pitch Only right tilt operation is possible Max. 890 mm (35.1 in)