100 TILT STEERING RT75H RT75M RT95H RT95M REF NO. PART NUMBER QTY DESCRIPTION REMARKS 31. 106-049 6 BOLT (#10-24 X 3/4", PLPS) 32. 107-744 2 WASHER (M6) 34. 106-574 2 CLIP NUT (M6-1.00) 35. 308-888 1 CUP HOLDER 33. 106-048 8 LOCKNUT (#10-24) 36. 107-801 18 WASHER (M6) 37. 110-208 1 LEVEL INDICATOR 38. 116-525 1 BUMPER 41. 318-557 1 CONSOLE BASE 40. 107-800 2 WING SCREW (M6-1 X 25mm) 39. 106-252 2 JAM NUT (5/16-NC) 42. 115-686 AR BULK EDGE (5/32",SOLD PER 1") 43. 314-487 1 BRACE USE 1 @ 25" NOT USED ON POWER SHIFT UNITS 44. 220-1241 1 30 PIN CONTROLLER V3 SEE FOOTNOTE 1 45. 106-161 2 FLG SCREW (M6-1.00 X 20MM) SEE FOOTNOTE 1 46. 106-538 2 LOCKNUT (M6-1.00,PRV TRQ,10.9) SEE FOOTNOTE 1 47.
106-386 2 FLG LOCKNUT (M8-1.25) NOT SHOWN: FOOTNOTES: 1. USED WITH REAR STEER OPTION OR REAR STEER AND CRUISE CONTROL OPTION WHEN UPDATED WITH THE REAR STEER KITS 190-1437 OR 190-1438. CRUISE ONLY OPTION USES MODULE 220-569 @1X, BOLTS 105-815 @ 2X, AND NUTS 106-048 @ 2X. NOTE: 07 ID0024293