85 ENGINE ENCLOSURE REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 334-092 1 LEFT SIDE PANEL 2. 334-091 1 RIGHT SIDE PANEL 3. 194-558 1 EXHAUST STACK (4") 191-227 SIDE PANEL LOCK KIT 5. 323-496 1 MID HOOD ASSEMBLY 4. 194-027 1 BAND CLAMP (4.143") 6. 307-909 1 FRONT HOOD SUPPORT 7. 310-716 1 FIREWALL 111-043 9 INSULATION STUD 117-341 1 SOUND INSULATION 8. 211-087 1 BATTERY JUMPER TERMINALS (RED) 9. 117-344 AR BULK EDGE (3/16", SOLD PER 1') USE 2@ 25" 10. 110-681 4 DRAW LATCH 11. 117-344 AR BULK EDGE (3/16", SOLD PER 1') 12. 107-001 7 FLG LK SCREW (M10-1.50 X 25mm) 13. 106-266 4 FLG NUT (M10-1.50) 14. 107-003 11 FLG LK SCREW (M12-1.75 X 35mm) 15. 106-709 9 FLG LK NUT (M12-1.75) USE 1@ 16" 16.
106-558 3 CLIP NUT (M10-1.50) 17. 106-048 8 LOCKNUT (#10-24) 18. 106-408 8 BOLT (#10-24 X 1-1/4",SOC, GD8) 19. 116-489 AR BULK EDGE (1/8", SOLD PER 1') USE 2@ 21" USE 1@ 26" 20. 116-421 AR BULK EDGE (1/8", SOLD PER 1') INCLUDES HARDWARE 21. 217-819 1 BATTERY DISCONNECT SWITCH 23. 106-725 2 SCREW (M10-1.50 X 65mm, SOC) 24. 106-081 2 SCREW (M10-1.50 X 35mm, 12.9) 25. 106-387 8 FLG LOCKNUT (M10-1.50) 22. 110-253 8 POP RIVET (3/16" X 1/2") 28. 110-348 4 POP RIVET(3/16" X .664") 27. 318-523 2 LOCK BRACKET 26. 194-345 2 LOCK CABLE 29. 214-873 1 POSITIVE JUMPER CABLE 30. 320-255 1 THREAD PLATE 31. 107-004 1 FLG LK SCREW (M12-1.75 X 45mm) 32.
115-686 2 BULK EDGE (5/32", SOLD PER 1") 5-1/2" EACH SEE FOOTNOTE 1 NOT SHOWN: FOOTNOTES: 1. REF #31 (107-004) IS USED IN POSITION SHOWN ONLY, THIS WILL ALLOW REF #26 (LOCK CABLE) TO BE ATTACHED AS REQUIRED. NOTE: 04 ID0024291