91 TRENCH DEPTH METER/ODOMETER MT REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 107-004 3 FLG LK SCREW (M12-1.75 X 45mm) 2. 315-744 1 SENSOR BRACKET RT95 / RT115 & SEE FOOTNOTE 2 3. 106-709 3 FLG LK NUT (M12-1.75) 4. 105-680 2 NUT (M4, W/LK WSHR) 5. 107-597 2 WASHER (M4) 6. 107-451 AR SHIM (.135") SEE FOOTNOTE 1 7. 214-692 1 PROXIMITY SWITCH 8. 107-414 2 SCREW (M4-0.70 X 30mm, BUT SOC) RT95 / RT115 & SEE FOOTNOTE 2 NOT SHOWN FOOTNOTES FOOTNOTES 1. SHIMS (107-451) ARE USED TO ADJUST SPACING OF PROXIMITY SWITCH (214-692) FROM THE DRIVE SHAFT. 2. RT75 USES 2X 105-003 (FLG LOCKNUT 5/16-NC) & 2X 105-190 (BOLT 5/16-NC X 2-3/4") NOTE C 808-876