93 COUNTERWEIGHT/GRILLE (RT SERIES) ENDS WITH SERIAL NUMBER (SEE NOTES) REF NO. PART NUMBER QTY DESCRIPTION REMARKS 1. 106-633 6 SCREW (M20-2.5 X 130mm) 2. 106-665 6 LOCKNUT (M20-2.50, 10.9) 3. 375-370 1 CASTING (FRAME NOSE) 4. 327-389 2 CLAMP BAR SEE FOOTNOTE 2 & 4 5. 313-825 2 GRILLE 6. 118-400 2 SHIM (.075") 7. 117-386 2 EXTENSION SPRING 8. 308-723 2 SCREEN 9. 106-987 2 FLG LK SCREW (M6-1.00 X 16mm) 10. 178-873 2 SCREEN RETAINER 11. 106-574 2 CLIP NUT(M6-1.00) 12. 307-909 - FRONT HOOD SUPPORT 13. 106-237 3 LOCKNUT (M6-1.00, PRV TRQ, NLK) 14. 105-284 3 WASHER (3/16") 15. 106-161 3 FLG SCREW (M6-1.00 X 20mm) 16. 318-726 1 PLATE 17.
217-267 1 HYDROSTAT FRAME HARNESS 217-268 1 POWERSHIFT FRAME HARNESS 18. 306-609 1 HIGH FREQUENCY HORN 192-006 1 HIGH FREQUENCY HORN 192-005 1 HORN BRACKET 19. 106-992 2 FLG LK SCREW (M8-1.25 X 25MM) 20. 106-386 2 FLG LOCKNUT (M8-1.25) 21. 323-673 1 HORN BRACKET SEE FOOTNOTE 1, 3 & 4 SEE FOOTNOTE 4 SEE FOOTNOTE 3 SEE FOOTNOTE 4 OBSOLETE NOT SHOWN: FOOTNOTES: 2- INSTALL REF #4 (327-389) WITH THICK EDGE TO FRAME. 1- TORQUE BOLT TO 350 FT/LB (475 N/m) 3- REFER TO NOSE CASTING INSTALLATION INSTRUCTIN 051-420. 4- 104-186, BOLT AND SHIM KIT, INCLUDES REF #'S 1,2,4 & 6. NOTE: 1. RT75 ENDS WITH S/N 5Z0663. 2. RT95 / RT115 ENDS WITH S/N 5Z0676 14 ID0030955