Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

Fuel 47 7. Install the filter element, filter cover and cover seal, and filter collar. Hand-tighten the filter col- lar. 8. Remove the filter vent; then fill with fuel until fuel is about 1 inch above the collar. Install the filter vent. 9. Start the engine, then raise the rpm for 1 minute to purge air from the system and check for fuel leaks. 10. Shut down the engine and correct any fuel leaks. Heavy-Duty Trucks Maintenance Manual, October 1997 47/9