Freightliner — FLA COE, FLB COE, FLC112 Conventional, FLD Conventional, FLL COE

General Information 00 Torque Specifications Tables: 00–15 Torque Values for U.S. Customary Thread Fasteners with Dry (Unlubricated) * Plain (Unplated) Threads Thread Diameter– Pitch Regular Hex Flanged Grade 5 Bolt Grade 5 or B Nut Grade 8 or 8.2 Bolt Grade 8 or C Nut Grade 8 or 8.2 Bolt Grade G Nut Torque: lbf·ft (N·m) Torque: lbf·ft (N·m) Torque:

lbf·ft (N·m) 1/4–20 f230002 f230003 f230004 f230005 f230008 f230009 8 (11) 10 (14) 1/4–28 9 (12) 12 (16) 5/16–18 15 (20) 22 (30) 22 (30) 5/16–24 17 (23) 25 (34) 3/8–16 28 (38) 40 (54) 40 (54) 3/8–24 31 (42) 45 (61) 7/16–14 45 (61) 65 (88) 65 (88) 7/16–20 50 (68) 70 (95) 1/2–13 70 (95) 95 (129) 95 (129) 1/2–20 75 (102) 110 (149) 9/16–12 100 (136) 140 (190) 140 (190) 9/16–18 110 (149) 155 (210) 5/8–11 135 (183) 190 (258) 190 (258) 5/8–18 155 (210) 215 (292) 3/4–10 240 (325) 340 (461) 340 (461) 3/4–16 270 (366) 380 (515) 7/8–9 385 (522) 540 (732) 7/8–14 425 (576) 600 (813) 580 (786) 820 (1112) 1–12 635 (861) 900 (1220) 1–14 650 (881) 915 (1241) * Threads may have residual oil, but will be dry to the touch.

Male and female threads (bolt and nut) must both be unlubricated and unplated; if either is plated or lubricated, use Table 4 . Freightliner recommends that all plated and unplated fasteners be coated with oil before installation. Table 5, Torque Values for U.S. Customary Thread Fasteners with Dry (Unlubricated) Plain (Unplated) Threads Heavy-Duty Trucks Maintenance Manual, October 2009 00/31