. OPERATION DETAILED CONTROLS AND GAUGES and outside air (FRESH) is performed automatically. Display Monitor Monitor (7) displays the status of temperature setting (a), air flow (b), and vents (c). When OFF switch (1) is pressed, the display of temperature setting (a) and air flow (b) goes out, and operation stops. 3 - 57 Auto Switch With switch (5), the air flow, vents, and air source Wi source (RECIRC/FRESH) ar e automatically selected according to the set temperature. When auto switch ( lights up. 5) is pressed, the lamp above the auto switch Press switch (5), t the temperature, control.
When the control hen use temperature control switch (3) to set and run the air conditioner under automatic is switched from automatic operation to manual operation, it is possible to operate th e to change a ir flow, vents, and air sour ce (RECIRC/FRESH). W hen manual control is used, lamp abo ve the auto switch goes o ut. REMARK When Auto Mode is selected, if the set tempe rature is set t o 18.0 °C (64.4 ° F) or 32.0 °C ( 89.6 °F), the air fl ow is always set to High, b ut this is not a problem. FRESH/RECIRC Selec tor Switch Switch (6) is used to switch the air source bet ween recirculation of the air inside the cab and intake of fresh air fr om the outsid e.
When switch (6) is pressed, the lamp abov e the selector switch lights up to show t During automatic o hat air is being blown out peration, the selection of . inside air (RECIRC) Outsid RECIRC Use th e air is shut off and only air inside the cab is circulated. is setting to perform rapid cooling of the cab or when outside air is dir Outsid FRESH Use th e air is taten into the cab. is setting to take in fresh air when performing demisting.