. OPERATION DETAILED CONTROLS AND GAUGES REMARK Keep spare grease in grease can storage location in the grease pump chamber. 3 - 78 Supplying Grease 1. Remove bolts (2) at 2 places, t bracket (1). 2. Remove wing bolts (4) of gr remove cover (5) together wit 3. Remove follow plate (6) insid 4. Fill grease can (3) with fresh top of the grease surface flatl until grease oozes out from th the plate. Whenputting follow plate hollow in the center of the f the operation to be carried 5. Insert the grease pump into th follow plate (6), set cover (5) wing bolts (4) uniformly to hol 6. After fitting grease pump hold grease pump, install with 2 b 1.
Remove bolts (2) at 2 places, t hen remove grease pump holder bracket (1). Remove wing bolts (4) of gr ease can (3) at 3 places, then h the grease pump. e the grease can. 2. remove cover (5) together wit 3. Remove follow plate (6) insid 4. Fill grease can (3) with fresh grease, place follow plate (6) on top of the grease surface flatl y and press it down with fingers until grease oozes out from th e packing portion in the middle of the plate. Whenputting follow plate on top of the grease, first fill the ollow plate with grease to enable out smoothly. 5.
Insert the grease pump into th e packing portion at the center of follow plate (6), set cover (5) on grease can (3), then tighten 3 wing bolts (4) uniformly to hol d in position. 6. After fitting grease pump hold er bracket (1) into the head of the grease pump, install with 2 b olts (2). The pump will operate for a sh ort time and then stop, but the first grease includes air inside the pump, so it is or use. ump out all the grease which has ttom of check valve (7). heck valve (7) securely.
he pump, pull lever of the grease rease mixed with air from inside extremely careful not to let sand (6) or the suction portion of the ut the pump does not pump out (6) may not be correctly set in into position again. tains 18 liters (4.76 US gal). If a ed, there will be more grease left. cloudy white and not suitable f 7. Loosen check valve (7), and p air in it from hole (a) at the bo 8. After bleeding the air, close c 9. After bleeding air from inside t gun to completely discharge g the hose and grease gun. When filling with grease, be or dirt stick to follow plate grease pump.
If there is ample grease, b any grease, follow plate position, so correctly set it The standard grease can con 20-liter (5.28 US gal) can is us cloudy white and not suitable f 7. Loosen check valve (7), and p ump out all the grease which has air in it from hole (a) at the bo 8. After bleeding the air, close c 9. After bleeding air from inside t he pump, pull lever of the grease gun to completely discharge g rease mixed with air from inside the hose and grease gun. When filling with grease, be extremely careful not to let sand The standard grease can con tains 18 liters (4.76 US gal). If a 20-liter (5.28 US gal) can is us ed, there will be more grease left.