. OPERATION MACHINE OPERATIONS AND CONTROLS Adjustment Seat Adjustment WARNING When adjusting the position of the operator's seat, always set the lock lever to the LOCK position to prevent any accidental contact with the control levers. (B) Adjusting reclining 3 - 91 Always adjust the operat or's seat before starting each operatio n or when the operators ch ange shift. Adjust the operator's sea t so control levers and switches can be operated freely and easily with the operator's t. e operated freely and eas ily with the operator's back against the backres (A) Fore-and-aft adjustment Pull lever (1) up, set the sea t to the desired position, then release the lever.
0 mm (6.3 in) (16 stages) Fore-and-aft adjustment: 16 NOTICE The operator's seat can be re clined to a large angle when the seat is completely pushed forward, bu t the reclining angle is reduced when the seat is moved backward. So re turn the seat to its upright position before moving the seat to the rear. Pull up lever (2) and set the backrest to a position that is hen release the lever. comfortable for operation, t Sit with your back against th e seat backrest when adjusting. If your back is not against the back rest, the backrest may suddenly move forward. (C) Adjusting seat tilt Forward tilt st angle of the front of seat.
(4 stages) t of the seat, keep the lever pushed down and apply your weight to the rear of seat. Push lever (3) down to adju st angle of the front of seat. (4 stages To raise the angle at fron t of the seat, keep the lever pushed d own and apply your weigh t to the rear of seat. To lower the angle at fro nt of the seat, keep the lever pushed down and apply your weigh t to the front of seat. Rear tilt gle of the rear of seat. (4 stages) Pull lever (4) up to adjust an To raise the angle at rea r of the seat, keep lever (3) pulled up, and s tand up slightly to rem ove your weight from the seat. r of the seat, keep lever (3) pulled up, and apply your weight to the seat.
13° To lower the angle at rea r of the seat, keep lever (3) pulled up, and apply your weight to t Amount of tilt: Up 13°, down Adjusting seat height at up or down by combining adjustments forward tilt and rear tilt. It is possible to move the se at up or down by combining adjustments fo rward tilt and rear tilt. After setting the forward tilt or rear tilt to the desired height, operat e the opposite part to set th e seat horizontal then secure in position. 2.4 in) Height adjustment: 60 mm (