Komatsu — STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS STARTING ENGINE WARNING or fire. START position to go 3 - 98 Start the engine o nly after sitting down in the operator Do not attempt to start the engine by short-circuiting th e engine starting circuit. Such an act may c ause a serious bodily i njury Check that there are no persons or obstacles in the su rrounding area, then sound the horn and st Never use startin g aid fluids as they may cause explos Exhaust gas is to xic. When starting the engine in confi ned spaces, be particularly careful to ensu NOTICE Before starting th e engine, check that fuel control dial idling (MIN) posit position, the engi engine parts. ion.

If the fuel control dial is at the f ne will accelerate suddenly and caus Do not keep the continuously for If the engine does key in starting switch (3) at the more than 20 seconds. not start, wait for at least 2 minutes, from the beginnin After the engine g. starts, wait for the engine oil pressur out. Do not touch pressure monitor the control levers or control pedal wh is lighted up. This machine is e quipped with an engine automatic preheating device that functions to sta rt the engine preheating automatically.

If the ambient tem perature is low, the preheating mo nitor will light up when the key in starti ng switch (3) is turn ed to the ON position to inform the operator that preheati ng has been started 1. Check the lock lever (1) is in the LOCK position lever is in the FREE position (F), the engine do 1. Check the loc k lever (1) is in the LOCK position FREE position (F), the engine do 2. Set fuel contro l dial (2) to the low idling (MIN) p