. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATION WARNING position and confirm that swing lock monitor lamp (2) lights up. 3 - 111 Befor e operating the control leve r, check the directio n of the t rack frame . If the track frame is faci ng the rear (if the sprocket is at t he front), t he machine mo ves in the o pposite direction fro the operation of the travel lev er (front and rear travel is revers ed, left and right steering i s reversed). Befor e starting th e machine off, check that t he area a round th e machine is safe, and sound the ho Do no t allow any one to enter the area aroun d the machine. Clear any obstac les fro m the trav el path.
There is a blind s pot at the rear o f the machi ne, so be particularly carefu l when traveling in revers If the control leve r is operated wh en the auto deceleration is being actuated, the engine speed will s uddenly rise, so be careful when operating. e machine off, check that the travel alarm sounds normally. Befor e starting th e machine off, check that t he travel alarm sound Preparations for Moving the Machine 1. Set swing loc k switch (1) t o the ON (actuate 2. Tur n fuel cont rol dia l (3) tow ards the fu ll speed (MAX) to in crease th e engine spee