. OPERATION LONG TERM STORAGE LONG TERM STORAGE BEFORE STORAGE NOTICE To protect the hydraulic cylinder piston rod while in storage, keep the work equipment in the posture shown at right. (This prevents rust from developing on the piston rod) DURING STORAGE WARNING 3 - 152 When putting the machine in stor age for a long time (more than one month), do as follows. Clean and wash all parts, then store the machine indoors. If the machine has to be stored outdoors, s elect level ground and cover the machine with canvas. his prevents moisture from collecting. efore storage. e hydraulic cylinder piston rod with grease. Completely fill the fuel tank.
T Lubricate and change the oil b Coat the exposed portion of th Disconnect the negative termin als of the battery and cover it or remove it from the machine and store it s eparately. Lock each control lever and pe dal with the lock lever and pedal lock. Set the stop valve to the LOCK position on machines ready for attachments. Inst all the blind plugs to t he elbows. Set the selector valve on the m achines which can install attachments to the "Wh ere no attachment is mounted" position. To prevent rust, fill with Komats u genuine supercoolant (AF-NAC) to give a densi ty of at least 30% for the engine coolant.
If it is necessary to perform the rust-p revention operation while the machine is indoors, open the doors and windows to improve ventilation and prevent gas poisoning . During storage, operate and m ove the machine for a short distance once a month so that a new film of oil will coat moving parts. At the same tim e, also charge the battery. For machines equipped with an air conditioner, operate the air conditioner for thr ee to five minutes onc e a month to circulate lubricant to all part conditioner. Also check the qu s of its compressor. Be sure to idle the engine at low speed and operate the air antity of refrigerant twice a year.
pment, wipe off all the grease from the hydraulic cylinder rods. When operating the work equi pment, wipe off all the grease from the hydraulic c If the machine is equipped with an air conditioner, operate the air conditioner for 3 to 5 minutes once a month to lubricateall parts of the air cond check the refrigerant level twic itionercompressor. Always run the engine at low i dle when doing this. I n addition, e a year.