. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN ENGINE OIL PAN, REPLACE ENGINE OIL FILTER CARTRIDGE WARNING after the engine is stopped and may cause serious burns. Wait for the oil then wrench remove it. REMARK leakage of oil. 4 - 57 Parts a temperature to go down before performing th Oil pan refill capacity: 53 liters (14.00 Prepare a filt er wrench 1. Remove co under drain 2. Install hose move lever After drainin Never loo come out When no 1. Remove co ver (1) u under drain valve (P) to catch the dr 2. Install hose (2) (kept in the toolbox move lever (3) of the drain valve dow n slowly and drain t After drainin Never loo g the oil, sen plug move the lever (a).
Even if it i up to close the val s not loosened, the come out when the lever is operat When no t using hose (2), keep it i 3. from the top of the engine, turn filter c artridge (4) to the le 4. Clean the fi lter holder , fill the new filt er cartridge with cle an oil, coat the thread and pac filter cartrid ge with clean oil (or coat it thinly with grease ), then install it to the filter hold Check that ther e is no old packing stuck to the filter holder. I f there is any old packing stuck 5. When instal ling, bring the packing s further 3/4 - 1 turn. When us ing a filter wrench for tigh tening, be extreme ly careful not to damage the filt