Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE WARNING it. 4 - 59 EVERY 1000 HOURS Maintenance for every 10, 100, 250, and 500 hours of service sh ould be performed at the After the engine has been o perated, all parts are at high temperature, s o do not replace the filter imm ediately. Wait for all parts to cool down before startin g the operation. inside the engine fuel piping system when the engine is running. High pressure is generated inside the engine fuel piping system when When replacing the filter, w ait for at least 30 seconds after stopping the engine to let the internal pressure go down before replacing the filter. e close.

e air bleed plug in the fuel filter head. It is still under pressure, so fuel may spurt out. Do not bring any fire or flam Be careful when opening th e air bleed plug in the fuel filter head. It is still under pressure, so fuel NOTICE Genuine Komatsu fuel filter cartridges use a special filter that has hi ghly efficient filtering ability. When replacing the filter cartridge, always use a gen uine Komatsu part. The common rail fuel inject ion system used on this machine consist s of more precise parts than the conventional injection pump and nozzle. If any part other than a genu ine Komatsu filter cartridge is used, dust or dirt may get in and cause p roblems with the injection system.

Always avoid usin g substitute parts. When carrying out inspectio n or maintenance of the fuel system, pay more attention than normal t o the entry of dirt. If dirt is stuck to any part, use fuel t o wash it off completely. Prepare a container to c atch drain oil. Prepare a filter wrench 1. Turn valve (1) at the bot tom of the fuel tank to the right to clos 2. Open the engine hood. 3. Set the container to cat ch the fuel under the filter cartridge (2) 4. Using a filter wrench, tu rn filter cartridge (2) counterclockwis to remove it.