Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE tightening of the filter if any damage or 4 - 61 Bleed the air as follow 9. Add fuel to the fue l tank un til full (to FULL mark on the 10. Loosen a ir bleed p lug (C) a t the fue l main filter head (3 11. Loosen w ing nut (6 ) holdin g lever (5 ) of priming pump ( 12. Push in l ever (5) re peatedl Check th at bubble s come o ut with t he fuel from air blee (C). 13. Tighten a ir bleed p lug Tightening torque: 4.9 to 6. 9 Nm (0. 5 to 0.7 kgm , 3.6 to 5 Tighten wing nut (6) secure Target tightening torque: 1 ly to loc 1.8 Nm ( k lever (5) i 1.2 kgm, 8. 15.

After repl acing the filter car tridge, st art the engine and run it at low idling for 10 minutes Check fo r leakage of fuel f rom the filter s eal s urface. If any f ue l is leaking, check the cartridge . If there i s still fue l leakag e, repeat S teps 1 - 4 to remove the filter cartridge, embedde d foreign material in the p acking surface is fo und, replace it with a new cartrid - 15 to in stall it.