Komatsu — PRECAUTIONS WHEN USING

. ATTACHMENTS AND OPTIONS GENERAL PRECAUTIONS FOR SAFETY 6 - 2 GENERAL PRECAUTIONS FOR SAFETY When installing attachments or options to the mach ine, it is necessary to pay attention to safety. Please obey the following precautions strictly when selecting, installi ng, or using attachments or options. PRECAUTIONS WHEN SELECTING Please consult your Komatsu distributor before in stalling attachments or options to the machine. Depending on the type of attachment or option, it may be nece ssary to install a front guard, overhead guard, or other safety structure to the machine. There may also be pro blems of the attachment or option hitting the operator's cab.

Install only attachments or options authorized by Komatsu. Komatsu cannot accept any responsibility for any f attachments or options not authorized by Komatsu. accident, damage, or failure caused by the use o READ THE INSTRUCTION MANUAL THOR OUGHLY Before using or starting the operation to remove o r install any attachment or optional device, read the instruction manual for the machine itself and for the attachm ent or optional device thoroughly. If you lose the instruction manual or it is damaged , always obtain an new copy from the attachment manufacturer or your Komatsu distributor.

PRECAUTIONS WHEN REMOVING OR IN STALLING When removing or installing the attachment or option , obey the following precautions, and take care to ensure safety during the operation. n a flat, firm ground surface. workers, choose the leader and follow his instructions. Carry out the removal and installation operation o When the operation is carried out by two or more Use a crane when handling heavy objects (more t han 25 kg (55 lb)). (The crane must be operated by a qualified operator.) Never go under a load raised by the crane. Do not carry out operations with the load kept rai sed by the crane. Always use a stand to prevent the load from falling.

When removing a heavy part, consider the balanc e after it is removed. To prevent the machine from tipping over, set a support in position if necessary before rem oving the part. t or option, set it in a stable condition to prevent it from falling n, please consult your Komatsu distributor. Before installing or after removing the attachmen over. For details of the removal or installation operatio PRECAUTIONS WHEN USING When long or heavy work equipment is installed, re member the following precautions. Before starting operations, move the machine to a safe place and carry out a test operation to make sure that you fully understand the the machine.

movement, center of gravity, and working range of Do not swing the work equipment if the machine i s at an angle. If the work equipment is swung with the machine at an angle, there is danger that the machine will tip over. Always maintain a safe distance from obstacles in the surrounding area when operating. If long work equipment is installed, the working range becomes larger. attention to the following precautions. If heavy work equipment is installed, pay careful The swing overrun (the distance the work equi is applied)will be greater. There is danger of hi space to the swing position when swinging.

The hydraulic drift of the work equipment(the a when it is stopped in a raised position) also b position; always lower it to the ground. Do not swing, lower, or stop the work equipm Do not suddenly extend or retract the boom c The swing overrun (the distance the work equi pment moves before completely stopping after the swing brake tting objects if the swing overrun is miscalculated, so allow extra The hydraulic drift of the work equipment(the a mount of the work equipmentmoves down under its own weight ecomes greater. Do not stop the work equipment in a raised ent suddenly. There is danger that the machine may tip over. ylinder. The shock may cause the machine to tip over.

Do not swing, lower, or stop the work equipm ent suddenly. There is danger that the machine may tip over. Do not suddenly extend or retract the boom c