. ATTACHMENTS AND OPTIONS ATTACHMENT GUIDE TRACK SHOES SELECTION 6 - 6 Select the appropriate t rack shoe to match the operating c onditions. Selection Check the category fro m th e uses in the table b elow, then selec t the shoes from t he table below that. Catego ry of use B and C are the wide shoe , so t here are l imits on the use. Check t he precautions examin e th e conditions o f use tho roughly, an d use the optimum shoes f or the situation When selecting the sho e width, c hoose the ing the ma narrowest sho es p ossible to brin g the machine within range where t here is n o pr oble m regard chine flotation a nd g round contac t pressure.
If wider shoe s than necessary a re used, the load on t he shoe wi ll increase, this may cause proble ms such as bending o f the shoe, crackin g of the link, damage of the pin, and l ooseness of the sho e bolts Category Use Precautions when using A Rocky ground, riverbeds, normal soil On rough ground with large obstacles such as boulders or fallen trees, travel at low speed. B Normal soil, soft ground These shoes cannot be used on rough ground where there are large obstacles such as boulders or fallen trees. Travel at Hi or Mi speed only on flat ground, and if it is impossible to avoid going over obstacles, shift down and travel at half speed in Lo.
C Extremely soft ground (swamp) Use only in places where machine sinks into ground and it is impossible to use A and B track shoes. These shoes cannot be used on rough ground where there are large obstacles such as boulders or fallen trees. Travel at Hi or Mi speed only on flat ground, and if it is impossible to avoid going over obstacles, shift down and travel at half speed in Lo. PC800,800SE PC800LC PC850,850SE Specifications Categor y Specifications Category Specifications Category Standard 610 mm Double A 810 mm Double A 610 mm Double A Option 710 mm Double A 1010 mm Double B 710 mm Double A Option 810 mm Double B 1110 mm Double C Option 910 mm Double B Option 1010 mm Double C