129 Maintenance Section Seat Belt - Replace i01625445 Seat Belt - Replace i01555371 Steering Cylinder Bearings - Lubricate SMCS Code: 7327-510 SMCS Code: 4303-086-BD g00841400 Illustration 214 Regardless of the appearance of the seat belt, the seat belt should be replaced at every three year interval. A date label is attached to each seat belt. Use this label in order to determine the age of the seat belt. Consult your Caterpillar dealer for replacement of the seat belt. g00808420 Illustration 215 Wipe all fittings before lubrication. i01555430 Service Brake Disc Wear - Check The rod end of the steering cylinders are lubricated by using a grease fitting (1) that is located on the cylinder.
SMCS Code: 4255-535 The head end of the steering cylinders are lubricated by using remote grease fittings. These fittings (2) and (3) are located on the left side of the machine. Reference: For information about checking the service brake wear indicator, refer to Testing and Adjusting, SENR4930, “950F Series II Wheel Loader Air System and Brakes” or consult your Caterpillar dealer. There is a total of four fittings. i01562042 Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate SMCS Code: 5104-086-BD; 6107-086-BD Wipe off all fittings before any lubricant is applied.