134 Maintenance Section Window Washer Reservoir - Fill Inspect the windows. Make sure that the operator’s vision is not impaired by dust, by mud, or by other foreign materials. Clean the windows, if necessary. For more information, refer to Operation and Maintenance Manual, “Windows - Clean”. i01562053 Window Wiper - Inspect/Replace SMCS Code: 7305-040; 7305-510 i01554406 Window Washer Reservoir - Fill SMCS Code: 7306-544 NOTICE When operating in freezing temperatures, use Caterpillar or any commercially available nonfreezing window washer solvent. g00811317 Illustration 227 Inspect the wiper blades. Replace the wiper blades if the wiper blades are worn or damaged or if streaking occurs.
i00037755 Windows - Clean g00808309 Illustration 226 SMCS Code: 7310-070 Window Washer Reservoir The window washer reservoir is located behind the operator compartment on the firewall. Open the cover in order to access the reservoir. g00038949 Illustration 228 Use commercially available window cleaning solutions in order to clean the windows. Clean the outside windows from the ground unless handholds are available.