. OPERATION EXPLANATION OF COMPONENTS ACCELERATOR PEDAL STEERING TILT LOCK LEVER WARNING When moved up to 40 mm (1.6 in) 0 - 130 mm (0 - 5.1 in) NOTICE Do not operate the lever (1) continuously by excessive force. The lever (1) may become loose or get out of angle. In this case, please ask your Komatsu distributor to carry out repairs. The bolts (2) and (3) on steering column are the left-hand screw. If they are screwed counterclockwise, it is not a loosening direction but a tightening direction (A).
3 - 55 This pedal ( 8) controls th e engin e speed and output The engine speed can be freely c ontrolled between lo w idle a nd full spee Stop the mac hine b efore ad justing t he til t of the steering wheel. If this operation (ad justment) is car ried out while the machine is moving, it may lead t o a seri ous accident or persona l injury. This lever i s used to unl ock and lock the steering column when adjusting th up or down. e position of the steering column to the front or rear or er up, set the steering wheel to the desired position, Pull the lev position, then he lever down to lock the steering column securely in of adjustment is as follows.
The amount of adjustmen t is as f th steerin olum Up-down movement When a 0 mm (0 i Tilt amoun 0 - 105 m t (0 - 4.1 in