Komatsu — CHECK BEFORE STARTING ENGINE, ADJUST

. OPERATION OPERATION OPERATION CHECK BEFORE STARTING ENGINE, ADJUST WARNING lock ring). 3 - 90 WALK-AROUND CHECK Befo re starting the engine, w alk around the machine and look at th e underside of chassis f or anything unusual l ike loose ge of fuel, oil and coolant. Also check the condition of the work equipment and the play, and collection of dust at places that reach high temperature. ork equipment the Also check for loose wiring, play, and collection of dust at places t hat reach high temperature. Remo ve any flammable materia ls from around the battery, engine, muffler, turbocharger, or other high temperature engine parts. Leaka ge of fuel or oil will cause the machine to catch fire.

Check carefully, b e sure to repair any problem , or contact y our Komatsu distributor. I f the machine is at an angle Alwa ys perform the procedu res in this section before starting the e 1. C heck for damage, wea r, play in work equipment, cylinders, li nkage and hoses. C a heck that there are no cracks, excessive wear, or play in the work equipment, cylinders, linkage, or hoses . If ny abnormality is foun d, repair it. 2. R emove dirt and dust fr om around engine, battery and radiato r. C m t heck if there is any dirt or dust accumulated around the engine or radiator.

Also check i f there is an y flammable aterial (dead leaves, t wigs, etc.) accumulated around the ba ttery or high temperatur e engine parts, such as he engine muffler or tur bocharger. Remove all such dirt or fla mmable material. 3. C heck for coolant or oil leakage around the engine. C is heck that there is no o il leakage from the engine or coolant l eakage from the cooling system. If a ny problem found, repair it. 4. C heck for leakage of oil from transmission case, axle, hydrauli c tank, hoses, joints heck that there is no o il leakage. If any abnormality is found , repair the leakage. 5. C heck for oil leakage fro m the brake line. C heck that there is no o il leakage.

If any abnormality is found , repair the leakage. 6. C heck for damage or w ear to tires and loose mounting bolts. ar to the wheels (side ri C T If heck for cracks or pe eling of the tires and for cracks or we ighten any loose whee l nuts. If any abnormality is found, rep air or replace the part. any valve caps are mi ssing, install new caps. im base 7. C heck for damage and l R epair any damage and 8. C heck for damage to ga uges, lamps on the instrument panel a nd loose bolts. C o heck for damage to the panel, gauges and lamps. If any probl em is found, replace the parts. Clea n of f any dirt n the surface. Tighten any loose bolts.