Komatsu — METHOD OF TOWING MACHINE

. OPERATION TROUBLESHOOTING OPERATION TROUBLESHOOTING REMARK release the brake. 3 - 157 3. Turn starting swi tch to the ON positio 4. ON (actuated), then move it to the OFF ( b) position (released) The parking brak 5. To restore the fu nction of the parking brake, turn grip (2) of the release valve clo ckwise to close the release valve, then turn wise to lock it. e Nm (2.5 ± 0.5 kgm , 18.1 ± 3.6 lbft) 5 Nm (2.0 ± 0.5 kgm , 14.5 ± 3.6 lbft) urn locknut (1) clock Tightening torqu Grip (2): 25 ± 5 Locknut (1): 20 ± 6. Move the parkin parking brake is To release the p Steps 1 to 4. g brake switch to the ON (a) position. The applied. arking brake again, repeat the procedure in 18.1 ± m , 14.

3.6 l 5 ± bft) 3.6 If the brake accumul ator pressure is low, the parkin g brake warning lamp may not go out, or the alarm buzzer may sound continuously. If this happens, go t o the following section "METHOD OF RELEASING MECHANICALLY" and