. ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM ATTACHMENTS, OPTIONS HANDLING AUTO-GREASING SYSTEM by turning cartridge cover (1) approx. 60 (3) by turning it to the Part No. Capacity 421-S95-3340 1000cc 6 - 35 1. degrees to the 2. Remove grea se cartridge ( detach seal c ap (4) at this t left. Do not 3. Detach cap (5 ) and middle plug (6) from new grease c artridge and tightly scr ew it in. y to ensure that no air enters. Screw in tightl y to ensure t hat no ai 4. When fixing, if grease cartridge is p ressed sl ightl y and grease comes out an cartridge is sc d deposits i n a hea ped s hap e, a nd if grease rewed into s uction p ort connector unde r above conditions,no air will enter.
(Max. N o. of turn s is approx. 5 ) 5. Turn the cove r to right and tighten it until securely fixed . If not tightened well , there is a po ssibility t hat it will work loos e du e to machine vibra tion. Use the grease c artridge show n below. Part name Q'ty Cartridge 1