Maintenance Specifications NOTE: “(AL)” stated in the specification data below represents the numerical value for the alumi- num propeller installed. Likewise, “(SUS)” represents the value for stainless steel propeller installed and “(PL)” for plastic propeller installed. EMU31480 Ignition system: CDI (micro computer) Spark plug with resistor (NGK): BR7HS-10 Spark plug gap: 0.9–1.0 mm (0.035–0.039 in) Control system: Remote control Starting system: Electric Starting carburetion system: Choke valve Min. cold cranking amps (CCA/SAE): 380.0 A Min. marine cranking amps (MCA/ABYC): 502.0 A Min. reserve capacity (RC/SAE): 124 minutes Alternator output for battery DC: 25.0 A Drive unit:
Gear positions: Forward-neutral-reverse Gear ratio: 1.86 (26/14) Trim and tilt system: Power trim and tilt Propeller mark: M Fuel and oil: Recommended fuel: Regular unleaded gasoline Min. pump octane: 86 Recommended engine oil: YAMALUBE 2-stroke outboard motor oil Lubrication: Oil injection Engine oil tank capacity: 0.9 L (0.95 US qt) (0.79 Imp.qt) EMU28218 Dimension: Overall length: 823 mm (32.4 in) Overall width: 577 mm (22.7 in) Overall height L: 1615 mm (63.6 in) Overall height X: 1742 mm (68.6 in) Transom height L: 516 mm (20.3 in) Transom height X: 642 mm (25.3 in) Weight (without propeller) X: 194.0 kg (428 lb) Performance: Full throttle operating range:
4500–5500 r/min Maximum output: 110.3 kW@5000 r/min (150 HP@5000 r/min) Idling speed (in neutral): 700 ± 25 r/min Engine: Type: 2-stroke V Displacement: 2596.0 cm 3 (158.41 cu.in) Bore Ч stroke: 90.0 Ч 68.0 mm (3.54 Ч 2.68 in) 40