UNIT OF COMPETENCY : DIAGNOSE AND REPAIR STARTING SYSTEM UNIT CODE : ALT723396 UNIT DESCRIPTOR : This unit covers the knowledge, skills and attitudes required to diagnose and repair starting system and its component. TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 99 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables 1.
Prepare to diagnose and repair starting system 1.1 Job requirements are determined based from industry criteria 1.2 Diagnostic information is sourced and interpreted using industry criteria 1.3 Diagnostic symptoms are analyzed using troubleshooting guide and those most appropriate to the circumstances are selected 1.4 Hazards associated with the work are identified and risks are managed 1.5 Tools, equipment, and materials are selected and checked for serviceability 1.6 Defective and damaged tools and equipment are reported following workplace procedures.
1.7 Availability of materials are checked and reported following workplace procedures 1.1 Different job requirements 1.2 Diagnostic information 1.3 Troubleshooting guide 1.4 Industry criteria 1.5 Tools, equipment, and materials in diagnosing and repairing starting system 1.6 Procedure in accomplishing forms 1.7 Pre-heating System Operation for Diesel Engine 1.8 Chemistry (battery solutions and chemical reactions) 1.9 Hazards associated with the operations 1.10 Risk Management 1.11 OSHS 1.12 Tools and measuring equipment 1.1 Interpreting job requirements from workplace instructions 1.2 Selecting best tooling option for the work and sequence procedure to reduce time and material wastage 1.3 Sourcing and interpreting diagnostic information 1.4 Analyzing diagnostic options 1.5 Using troubleshooting guide 1.6 Identifying hazards 1.7 Managing risks 1.8 Selecting and checking tools, equipment and materials 1.9 Reporting defective and damaged tools and equipment 1.10 Checking and reporting the availability of materials