RANGE OF VARIABLES TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 103 VARIABLE RANGE 1. Job requirements Job requirement may include: 1.1 Inspection of starter motor components operation 1.2 Repair and replacement of starter motor 1.3 Inspection and repair of starting system circuit 2. Industry criteria May include: 2.1 Manufacturer specifications 2.2 Repair/Service manual 2.3 Workplace procedures 2.4 Safety and environmental requirements 2.5 Technical Service bulletin 3. Tools and equipment Tools, equipment and materials may include: Tools:
3.1 Basic hand tools 3.2 Torque wrench 3.3 Multimeter 3.4 Bench vice 3.5 Ammeter (60-100 Amp) (digital and analog) 3.6 Multi- tester (analog and digital) 3.7 Jumper cable 3.8 Soldering iron 3.9 Soldering stand 3.10 Trouble light 3.11 Extension/ power cable (10m) 3.12 Desoldering tool 3.13 Vernier Caliper Equipment: 3.14 Hydraulic Lifter 3.15 Crocodile jack 3.16 Jack stand 3.17 Puller 3.18 Creeper Materials 3.19 Rags 3.20 Contact cleaner 3.21 Penetrating oil 3.22 Gloves 3.23 Sand paper 3.24 Grease 3.25 Soldering lead 3.26 Soldering paste 3.27 Electrical tape 3.28 Automotive wire (various sizes) - #16 awg - #18 awg - #12 awg 3.29 Cable tie 3.30 Carbon brush