TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 114 2. Diagnose body electrical system 2.1 Diagnostic tests are performed according to industry criteria. 2.2 Inspection is carried out according to industry criteria. 2.3 Inspection results are compared with manufacturer specifications 2.4 Faults are identified from diagnostic test results following industry criteria 2.5 Causes of faults are determined following industry criteria 2.6 Findings are reported according to workplace procedures, including recommendations for required repairs or adjustments 2.7 Safety practices are applied following Occupational Health and Safety (OSH) procedure.
2.1 Electrical principles 2.1.1 Current, voltage, resistance and power 2.2 Series circuits 2.3 Parallel circuits 2.4 Series parallel circuits 2.5 Ohm’s law 2.6 Diagnostic tests 2.7 Faults and its causes 2.8 Electrical troubleshooting guide 2.9 Industry criteria 2.10 Faults of body electrical system 2.11 Manual air- conditioner system 2.12 Lighting 2.13 Wiper operation 2.14 Door locks 2.15 Window regulator 2.16 Horn 2.17 Accessories 2.18 Mensuration 2.19 Inspection procedure 2.20 Arithmetic operation 2.21 Battery tester 2.22 Fundamentals of electromagnetism 2.23 Fundamental of electricity 2.24 Techniques for reading and interpreting technical information, including circuit types, diagrams and symbols 2.25 Procedures for using and operating electrical test equipment 2.26 Procedure in accomplishing checklists 2.27 OSHS 2.1 Locating appropriate sources of information 2.2 Interpreting text, symbols, and wiring diagrams in diagnostic and repair information 2.3 Interpreting numerical information in manufacturer repair manual.
2.4 Performing diagnostic tests 2.5 Carrying out inspection 2.6 Comparing inspection results 2.7 Identifying faults and its causes 2.8 Reporting findings 2.9 Applying safety practices