3.3 TRAINEE ENTRY REQUIREMENTS Trainees or students who would like to enroll in this program must possess the following requirements: A holder of National Certificate in Automotive Servicing NC I; Basic communication skills; Basic mathematical skills; Basic computer skills This list does not include specific institutional requirements such as educational attainment, appropriate work experience, and others that may be required of the trainees by the school or training center delivering the TVET program.
3.4 LIST OF TOOLS, EQUIPMENT, AND MATERIALS AUTOMOTIVE SERVICING (ELECTRICAL REPAIR) NC II Recommended list of tools, equipment and materials for the training of 25 trainees for Automotive Servicing (Electrical Repair) NC II. Up-to-date tools, materials, and equipment of equivalent functions can be used as alternatives. This also applies in consideration of community practices and their availability in the local market. A.
FULL QUALIFICATION TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 160 TOOLS QTY DESCRIPTION 5 sets Basic hand tools (Mechanical pliers, Screw driver, socket wrench, spanner, hammer) 1 set AC clutch coil puller 1 set Alternator bearing puller 5 pc Snap ring plier 5 pc Straight hexagon wrench 5 pcs. Torque wrench 5 pcs. Feeler gauge 2 pcs Service type Thermometer (10 to 100 degrees C) 1 pc hygrometer 2 pcs Timing light 1 pc Bench vice 2 pcs Belt tension gauge 2 pcs Wire splicer 5 sets Feeler gauge 2 sets Spark plug wrench (14mm,16mm,21mm) 1 pc Vernier Caliper 1 pc Bench vice (6”) 1 set Jumper cable (400amph) 2 pcs Trouble light LED (15w)