TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 87 ELEMENT PERFORMANCE REQUIRED KNOWLEDGE REQUIRED SKILLS CRITERIA Italicized terms are elaborated in the Range of Variables manufacturers manual. 2.4 Tools are used following industry criteria. 2.5 Safety practices are applied following OSHS. 2.4 Out of specification parts 2.5 Identification of hazards 2.6 Risk management 2.7 OSHS 2.8 Wearing of PPEs 2.9 Health protocols issued by government on prevention on spread of and protection from infectious disease in the workplace 2.10 Attitude:
2.9.1 Patient 2.9.2 Attention to details 2.9.3 Time conscious 2.9.4 Honest 2.3 Dismantling magnetic clutch 2.4 Inspection magnetic clutch component 2.5 Sourcing and replacing out of specification component 2.6 Using special service tools (SST) 2.7 Applying safety practice 3. Install magnetic clutch components 3.1 Magnetic clutch components are installed according to industry criteria. 3.2 Tolerances, resistances and clearances are measured following industry criteria. 3.3 Installation of magnetic clutch components is completed based on industry criteria. 3.4 Post-installation testing is carried out according to industry criteria. 3.5 Safety practices are applied following OSHS.
3.1 OSHS 3.2 Wearing of PPEs 3.3 Health protocols issued by government on prevention on spread of and protection from infectious disease in the workplace 3.4 3Rs 3.5 5S of Good Housekeeping 3.6 Types, characteristics and operating principles of magnetic clutch components 3.7 Tolerances, resistances and clearances of magnetic clutch components 3.8 Industry criteria 3.1 Installing magnetic clutch components 3.2 Measuring tolerances, resistances and clearances of components 3.3 Completing installation of magnetic clutch components 3.4 Carrying out post- installation testing 3.5 Applying safety practices