RANGE OF VARIABLES TR-Automotive Servicing (Electrical Repair) NC II Revision 01 Promulgated (08/11/2020) 95 VARIABLE RANGE 1. Job requirements Job requirements may include: 1.1 Check and replace the ignition switch 1.2 Check and replace contact points and condenser. 1.3 Check and adjust dwell angles 1.4 Check and replace the spark plug and high-tension wires 1.5 check and replace ignition coil 1.6 Check and replace distributor 1.7 Check and adjust spark plug air gap clearance 1.8 Check and replace igniter 1.9 Troubleshoot of ignition system circuit 2. Industry criteria Industry criteria may include:
2.1 Manufacturer specifications 2.2 Repair/Service manual 2.3 Workplace procedures 2.4 Safety and environmental requirements 3. Tools and equipment Tools and equipment may include: 3.1 Tools: 3.1.1 Basic hand tools 3.1.2 Feeler or thickness gauge 3.1.3 Multi – tester (analog and digital) 3.1.4 Spark plug wrench 3.2 Equipment: 3.2.1 Timing light 3.2.2 Service Trouble Light 4. Materials Materials may include: 4.1 Cotton Rags 4.2 Grease 4.3 Penetrating oil 4.4 Electrical tape 4.5 Contact cleaner 4.6 PPEs - Face mask - Face shield* - Goggles - Gloves - Coverall suit - Safety shoes 5. Repair options Repair options may include: 5.1 Replacement 5.2 Soldering 5.3 Adjusting 5.4 Insulating 6.
Post-repair testing May include: 6.1 Check and secure wiring/harness connections 6.2 Check ignition switch connections