4M41 ENGINE - Cylinder Head and Valve Mechanism 11B-16-7 " C A VALVE STEM SEAL INSTALLATION (1) Apply a thin coat of engine oil to the lip A of the valve stem seal 22 , then press in the valve stem seal 22 by hand until its lower end B contacts the top of the valve guide 25 , 26 . (2) Install the valve stem seal 22 in position by carefully striking the special tool vertically until it comes into full to fully contact with the valve spring seat surface in the cylinder head 32 . MH063609 23, 24 25, 26 32 A 22 B " D A VALVE SPRING INSTALLATION Install the valve spring 20 with the blue painted end A upward.
20 A MD998772 " E A VALVE COTTER INSTALLATION 1> Using the special tools, install the valve cotters 18 as follows. MD998784 18 Component parts of special tool MD998772 Valve Spring Compressor A : Wing bolt B : Retainer C : Handle D : Nut E : Bolt F : Slotted screw G : Stay H : Lock nut J : Tension spring K : Mobile nut L : Washer M : Snap ring N : Retainer holder A B C D E G F J K L M N H MD998784 P (1) Install the special tools on the cylinder head 32 as shown in the illustration. P : Bolt (M8 x 12.5 mm) 32 PWEE9409-D E Feb. 2000 Mitsubishi Motors Corporation Added