Caterpillar — cat.com, стр. 18

EMCP 4.2 GENERATOR SET CONTROLLER OPTIONAL MODULES The RTD module serves to provide expandable generator temperature monitoring capability of the EMCP 4 and is capable of reading up to eight type 2-wire, 3-wire and 4-wire RTD inputs. The RTD Module has been designed for use on the Accessory Communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application. A maximum of one RTD Module may be used with a single EMCP 4.2.

THERMOCOUPLE MODULE The thermocouple module serves to provide expandable engine and generator temperature DIGITAL INPUT/OUTPUT MODULE monitoring capability of the EMCP 4 and is The Digital Input/Output (DI/O) module serves to capable of reading up to twenty Type J or K thermocouple inputs. The thermocouple provide expandable Input and Output capability of the EMCP 4 and is capable of reading 12 digital module has been designed for use on the accessory communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application. A maximum of one thermocouple modules may be used with a single EMCP 4.2 on each datalink.

RTD MODULE inputs and setting 8 relay outputs. The DI/O module has been designed for use on the accessory Communication Network and may be used in either local (package mounted) or remote (up to 800 feet) application. A maximum of four DI/O modules may be used with a single EMCP 4.2. Information contained in this publication may be considered confidential. Discretion is recommended when distributing. Materials and specifications are subject to change without notice. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.