Engine Operation - Except 4.5L Engines 4. Set slow idle as follows: Panels with high-low speed select rocker switch (B) only: Set slow speed by pressing lower half of switch. Panels with optional analog throttle(s) (A) : Set high-low speed select rocker switch to slow (turtle), then push in on analog throttle handle or turn full counterclockwise to set analog throttle(s) to slow speed. IMPORTANT: Do not operate the starter for more than 30 seconds at a time. To do so may overheat the starter. If the engine does not start the first time, wait at least 2 minutes before trying again. If engine does not start after four attempts, see Troubleshooting section.
RG13279 –UN–30OCT03 Analog Throttle Control and Speed Select Switch On Earlier Panel (Left) or Later Panel (Right) A—Analog Throttle Control (Optional) B—Speed Select Rocker Switch Continued on next page OURGP11,0000136 –19–20NOV03–2/3 19-5 021604 PN=103