Fuels, Lubricants, and Coolant Diesel Engine Break-In Oil New engines are filled at the factory with John Deere ENGINE BREAK-IN OIL. During the break-in period, add John Deere ENGINE BREAK-IN OIL as needed to maintain the specified oil level. Change the oil and filter after the first 100 hours of operation of a new or rebuilt engine. After engine overhaul, fill the engine with John Deere ENGINE BREAK-IN OIL. If John Deere ENGINE BREAK-IN OIL is not available, use a diesel engine oil meeting one of the following during the first 100 hours of operation:
API Service Category CE API Service Category CD API Service Category CC ACEA Oil Sequence E2 ACEA Oil Sequence E1 After the break-in period, use John Deere PLUS-50 or other diesel engine oil as recommended in this manual. IMPORTANT: Do not use PLUS-50 oil or engine oils meeting any of the following during the first 100 hours of operation of a new or rebuilt engine: API CI-4 ACEA E5 API CH-4 ACEA E4 API CG-4 ACEA E3 API CF-4 API CF-2 API CF These oils will not allow the engine to break-in properly. PLUS-50 is a trademark of Deere & Company DX,ENOIL4 –19–07NOV03–1/1 10-6 021604 PN=36