Instrument Panel - Elect. Cont. Earlier Engines The cancel/resume function is intended for applications like agricultural tractors and sprayers that turn around at the end of each row in a field. This allows the operator to use the throttle and/or brake to turn the vehicle around. When ready to resume field operations, the operator brings the engine speed above 1300 rpm and activates the cancel/resume function again to resume cruise speed. An internal timer gives the operator one minute to complete the turnaround maneuver. The cruise control has the normal functions of: Cruise control power or or “bump engine speed. “Resume” or “bump down” engine speed.
Use vehicle brake or clutch pedal to disengage cruise control. The “bump and “bump down” speed controls allow the operator to change the set speed. Small engine speed changes can be made by “bumping” the control switch. Holding the “bump or “bump down” switch will result in greater engine rpm changes until the engine reaches either full speed or idle. The cruise control cannot operate beyond the normal min/max engine speeds. OURGP11,000027A –19–25NOV03–7/7 16-7 021604 PN=53