MACHINE OPERATIONS AND CONTROLS 3.3.1.4 OPERATIONS BEFORE STARTING ENGINE When standing up from the operator's seat, always set the safety lock lever to the LOCK position, regardless of whether the engine is running or stopped. 1. Check that safety lock lever (1) is at the LOCK position (L). NOTE If the safety lock lever is not at LOCK position (L), the engine will not start. Machine equipped with canopy If the safety lock lever on either the left or right is not at LOCK position (L), the engine will not start. Machine equipped with cab NOTE For machines equipped with a cab, there is only a safety lock lever on the left. 2. Check the position of each levers. 3.
Insert the key in starting switch (2), turn the key to the ON position, then carry out the following checks. 4. The buzzer sounds for approx. 1 second, then the moni tors and gauges light up for approx. 3 seconds. Preheating monitor (3) Charge monitor (4) Engine oil pressure monitor (5) Engine water temperature caution lamp (6) Fuel level caution lamp (7) Travel speed boost monitor (8) If a monitor or gauge does not light up or the buzzer does not sound, there is probably a blown fuse or disconnec tion in the monitor, so contact your Komatsu Utility Dealer for repairs. After approx. 3 seconds, only the following monitors stay lighted up. The other monitors go out.
Charge monitor (4) Engine oil pressure monitor (5) 99 WARNING