MACHINE OPERATIONS AND CONTROLS Permissible Water Depth When driving the machine out of water, if the angle of the machine exceeds 15°, the rear of the upper structure will go under water, and water will be thrown up by the radiator fan. This may cause the fan to break. Be extremely careful when driving the machine out of water. Do not immerse the machine in water by more than the per- missible depth (under center of carrier roller (1)). In addition, for parts that have been immersed in water for a long time, pump in grease until the old grease comes out from the bearings. (Around the bucket pins) 119 CAUTION