Komatsu — 4.7.1 SAFETY CRITICAL PARTS LIST

SAFETY CRITICAL PARTS 4.7 SAFETY CRITICAL PARTS To ensure safety at all times when operating or driving the machine, the user of the machine must always carry out periodic maintenance. In addition, to further improve safety, please contact your Komatsu Utility Dealer for period- ic replacement of parts related to safety and fire prevention in the "4.7.1 SAFETY CRITICAL PARTS LIST" list. Material quality of these parts can change as time passes and they are likely to wear our or deteriorate. However, it is difficult to determine the extent of wear or deterioration at the time of periodic maintenance.

Hence it is re- quired to replace them with new ones irrespective of their conditions after a certain period of usage. This is impor- tant to ensure that these parts maintain their full performance at all the time. Furthermore, should anything abnormal be found on any of these parts, replace it with a new one even if the peri- odic replacement time for the parts has not yet arrived. If any of the hose clamps show deterioration like deformation or crack, replace such a defective clamp with a new one together with a defective hose. Also carry out the following checks with hydraulic hoses which need not be replaced periodically.

Tighten a loos- ened clamp again or replace a defective hose, as such abnormality requires. When replacing the hoses, always replace the O-rings, gaskets, and other such parts at the same time. Ask your Komatsu Utility Dealer to replace the critical parts. 4.7.1 SAFETY CRITICAL PARTS LIST 170 No.

Safety critical parts for periodic replacement Q'ty Replacement interval 1 Fuel hose (fuel tank - water separator) 1 Every 2 years or 4000 hours, whichever comes sooner 2 Fuel hose (water separator - feed pump) 1 3 Fuel hose (feed pump - fuel filter) 1 4 Fuel hose (fuel filter - injection pump) 1 5 Fuel hose (fuel filter - fuel tank) 1 6 Spill hose (fuel filter - injection pump) 1 7 Spill hose (between nozzles) 2 8 Spill hose (nozzle - injection pump) 1 9 Spill cap 1 10 Hydraulic hose (main pump suction) 2 11 Hydraulic hose (main pump delivery) 4 12 Hydraulic hose (boom cylinder) 4 13 Hydraulic hose (arm cylinder) 4 14 Hydraulic hose (bucket cylinder) 4 15 Hydraulic hose (swing cylinder) 2 16 Seat belt 1 Every 3 years