MAINTENANCE PROCEDURE LOOSENING TRACK TENSION It is extremely dangerous to release the grease by any method except the procedure given below. If the track tension is not relieved by this procedure, please contact your Komatsu Utility Dealer. 1. Loosen plug (1) gradually to release the grease. 2. When loosening plug (1), turn it a maximum of one turn. 3. If the grease does not come out smoothly, move the ma chine forwards and backwards a short distance. 4. Tighten plug (1). 5. To check that the correct tension has been achieved, run the engine at low idling, move the machine slowly for wards (7 - 8 m), then stop the machine. 6.
Check the rubber shoe tension again, and if the tension is not correct, adjust it again. 7. Check the track tension again, and if the tension is not correct, adjust it again. 185 WARNING