MACHINE READY FOR ATTACHMENT 2. Selector Valve This valve (2) switches the flow of hydraulic oil. Position (a): When using breaker Turn spool (A) to the left until it is stopped by the stopper. Position (b): When using general attachment Turn spool (A) to the right until it is stopped by the stopper. Width across face of square portion of spool (A): 9 mm (0.355 in.). 3. Attachment Control Pedal This pedal (3) is used to operate the attachment. Top of pedal depressed: Oil flows to right side of arm (hydrau- lic tank side). Bottom of pedal depressed: Oil flows to left side of arm (opera- tor's seat side). 4.
Pedal Lock (for attachment control pedal) When attachment operation is not required, lock the at tachment control pedal with the pedal lock. If the attachment control pedal is accidentally pressed while it is not locked, a serious accident may occur. This plate (4) is a device to lock the attachment control pedal. When the pedal is covered by the plate, it is locked. 224 WARNING