Komatsu — 2.1.3 POSITION OF THE NOISE PLATES ON MACHINES WITH CAB

SAFETY, NOISE AND VIBRATION PLATES 2.1.3 POSITION OF THE NOISE PLATES ON MACHINES WITH CAB The noise plates must always be legible and in good conditions; for this reason, if they are dirty with dust, oil or grease, it is nec­ essary to clean them with a solution made of water and deter­ gent. Do not use fuel, petrol or solvents. If the plates are damaged, ask for new ones to Komatsu Utility or to your Komatsu Utility Dealer. In case of replacement of a component provided with a noise plate, make sure that this plate is applied also on the new piece.

NOISE OUTSIDE THE CAB This value indicates the noise level outside the machine and refers to the noise perceived by persons in the vici- nity of the work area. PC30MR-2 PC35MR-2 NOISE INSIDE THE CAB This value indicates the maximum noise level perceived by the operator’s ears inside the cab when this is com- pletely closed. PC30MR-2 PC35MR-2 24