Komatsu — 3.2.2 SWITCHES

DETAILED CONTROLS AND GAUGES 2. Horn Switch Press switch (2) at the center of the knob of the right work equipment lever to sound the horn. 3. Lamp Switch Use this switch (3) to turn on the headlamps and the lamp inside the machine monitor. For details, see "3.2.1.4 MONITOR SWITCHES PORTION" - " 1. Lamp Switch". 4. Travel Speed Selector Switch Use this switch (4) to switch the travel speed to low speed or high speed. For details, see "3.2.1.4 MONITOR SWITCHES PORTION" - " 2. Travel Speed Selector Switch". 5. Cab Heater Switch (Machines equipped with cab) This switch (5) is used to heat the operator's compartment. The flow rate of the hot air can be set to two levels. Position 0:

Off Position 1: Weak Position 2: Strong Hot water from the engine is used to carry out heating, so heating is possible when the engine cooling water is hot. 6. Windshield Wiper Switch (Machines equipped with cab) This switch (6) actuates the front window wiper. This is also used as the window washer switch. The switch is operated as follows. Wiper only When the switch is set to position (B), the wiper is actuated. Position (A): Wiper stopped Position (B): Wiper actuated 63